For securing to the exterior wall, we cut a spacer piece out of leftover wood and attached the National Hardware 2 1/2″ Corner Brace to it and the wall with concrete screws. We built our lattice screen without legs and attached it to the wall and the concrete pavers. When you build a lattice screen it will either need to have legs or attach directly onto the ground and/or wall. We painted our screen in black to match the outdoor shower. Paint or stain the lattice screen as desired. Now the lattice frame is complete! Attach a National Hardware 2 1/2″ Corner Brace to all four sides of the frame for stability. Using 1 1/4″ screws, attach the fill-it strips to the top of the lattice to sandwich the lattice in-between the strips and the frame. Turn the frame over and lay the lattice inside the frame. Attach them to the back of the frame (as shown) using 1 5/8″ screws. Cut the third piece into two pieces at 38 1/2″ long. Take the three remaining 1 x 3 pieces and cut two of them 72″ long. Now you need to build the back of the frame. You won’t actually be attaching the lattice piece until later in the process. Place the lattice inside the frame on the ground to make sure that it fits. * Pro Tip* Use a speed square to make a straight line!Īssemble the frame on the ground using 1 5/8″ deck screws with a screw gun. These four pieces will build the frame for the lattice. Then take the remaining 1 x 3 and cut into two 43 1/2″ pieces. Once the lattice is cut to size, take three of the 1 x 3 pieces and measure and cut two of the pieces to 72″ long. Our lattice was cut to 42″wide x 72″tall. Once you have decided on the size that you want for the screen, measure the lattice itself.Ĭut your lattice to size with a circular saw. Measure the area that you want to build a lattice screen for. HOW TO BUILD A LATTICE SCREEN INSTRUCTIONS: BUILDING THE SCREEN STEP 1 –
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |